Frequently Asked Questions
3.0" ID Coilover Springs FAQs
What coilovers use 3.0" ID springs?
What spring rate range is available in 3.0" ID?
Does the free spring swap apply to 3.0" ID springs?
Pre-Tuned For You And Your Ride
Smooth Body Shocks
Shop All ProductsInstalls & Services
Shop All Products
Eibach 3.0" inner diameter coilover springs are the standard spring size for Fox 2.5 and King 2.5 coilovers, the most popular coilover size for Toyota Tacoma, 4Runner, Ford Bronco, Jeep JL, and off-road truck builds generally. Available across a full range of spring rates, typically 400 to 950-plus lb/in depending on application, and lengths matched to common Fox and King 2.5 shock configurations, these springs cover the vast majority of coilover builds AccuTune sees come through the shop. Spring rate is calculated, not guessed: AccuTune recommends the correct rate for your build as part of every consultation, based on your vehicle's actual weight, lift height, and accessories rather than a generic one-size number pulled off a spec sheet.
That matters because too soft a spring sags or bottoms out under load, while too stiff a spring rides harsh on the days the truck isn't loaded down. If the recommended rate doesn't feel right once it's installed, AccuTune includes a free spring swap so the build gets dialed in correctly rather than living with a rate that's close but not quite right.
Filter By
Showing 1–2 of 2 results
Eibach 3.0" ID Coil Spring, Single Spring
Eibach 3.0" ID Coil Spring, Single Spring
$90.00
PolyPerformance 3.0" ID Flat Wire Tender Coil
PolyPerformance 3.0" ID Flat Wire Tender Coil
$45.00
Frequently Asked Questions
Eibach 3.0" inner diameter springs are the standard spring size for Fox 2.5 and King 2.5 coilovers — the most popular coilover size for Tacoma, 4Runner, Bronco, Jeep JL, and most off-road truck builds.
Spring rates from approximately 400 to 950+ lb/in are available depending on length and application. AccuTune will recommend the correct rate for your build.
Yes — the free spring swap service applies to all Eibach spring purchases through AccuTune, including 3.0" ID springs.
The perfect setup for your build
Have questions about Eibach 3.0" ID Coilover Springs? Our resource repository is packed with the top-tier tech articles, buyer's guides, and setup information you need to make the most informed decision possible. Whether you're just starting your research or ready to dial in your final setup, we've got you covered. Click below to explore everything AccuTune Offroad has to offer.
Pre-Tuned For You And Your Ride