Complete Weld On Jeep JK Coilover Kit – King 2.0
Free Shipping On Orders Over $150 Free Spring Swapping Free Spring Rate CalculationsThis kit was designed to fit Jeep JK’s with 2.5 x 12 travel King or Fox coilovers with 4-5 of lift while delivering 5 of up travel. Designed for maximum performance, amazing looks, and easy installation the AccuTune Off-Road Coilover Kit can take your Jeep JK to the next level. This kit features more up travel, lower heights, faster install, and stronger mounting than most bolt on kits. The AccuTune Offroad JK Coilover kit includes front and rear coilover brackets, front air bump mounts with your choice of coilover shocks and air bump stops.
For more details, see Specifications Tab below.
Choose Shock Options Below
-
- Product Features
- Specifications
Product Features
Suspension Engineering Experience
The AccuTune Off-Road Jeep JK Coilover Kit was developed using our 15 years of suspension engineering and shock tuning experience to deliver the ultimate performance. The basic fundamentals of suspension setup are Center of Gravity Height, Suspension Geometry, and Shock Setup. Each of these three items multiply by each other, when they're all perfect the performance is unbelievable, but having a problem with any one of them can ruin the whole experience. Our kit was designed to deliver the best comfort & performance possible: 4" lift height keeps the CG low and improves suspension geometry by reducing angles, our shock setup gives you 5" of up travel and is optimized around the JK chassis. The result is a kit that delivers more comfort, more control (no bucking or bouncing), and greater off-road performance than others.
Low Lift Height
This kit will support lift heights from 2.5" to 6" while retaining 5" of up travel. With some trimming our JK clears huge 40" BFG KR3 Tires while running a 4" lift in the front and 5" of up travel. By keeping the height low we are able to improve the stability and to improve the JK suspension geometry by reducing link angles.
Amazing Performance With 5 Inches of Up Travel
The AccuTune Off-Road Jeep JK Coilover kit was designed with performance in mind! Our kit will cycle a true 5 of up travel on a 4 lift. The increased up travel over other kits means a smoother ride and less bottoming out.
Weld On Strength
Coilovers add a lot more force to shock brackets because they now have to support the spring forces and damping forces. The brackets in our JK Coilover Kit are made from 3/16" laser cut and cnc bent steel so they can handle whatever you throw at them. In addition to being extremely strong these brackets are designed for a precise fitment making the install extremely simple.
Clean Looks
Our front Jeep JK Coilover Kit was designed to show off your beautiful new shocks. We went for a very clean look by removing all the factory brackets and focusing your attention on the shocks, reservoirs and adjusters.
Custom Tuned Shocks
At AccuTune Off-Road we tune every shock for your EXACT vehicle, your terrain, and your preferences. Each shock is run through our AccuTune Equations and equipped with AccuTune Double Flutter Stacks as necessary. The result is a JK Coilover Kit that delivers the ride you want.
Specifications
Jeep JK Lift Height Recommendations:
4″ front lift with 5″ of up travel is most common
12″ travel coilovers
37″ tires with tube fenders
40″ tires with high clearance plastic fenders
Requires 3″ bump stop spacers in front, rear depends on how much body you want to trim.
Recommend raised track bar and flipped steering
2.5″ front lift with 5″ of up travel is also common
10″ travel coilovers
35″ tires with tube fenders
Stock track bar and steering locations
Jeep JK Coilover Kit Details:
This kit was designed to fit Jeep JK’s running 2.0 x 12 or 2.5 x 12 travel King or Fox coilovers with 4-5 of lift while delivering 5 of up travel. The AccuTune JK runs this kit with Fox 2.5 x 12 IBP Coilovers, 2.5 bump stop spacers, and a 4 lift height by using the bent lower spring perches. 2.0 coilovers are about 1.5 shorter than 2.5 coilovers with short rod end, and are meant to use the straight lower spring perch. We included the two lower shock mounts to give you a lot of flexibility in lift height.
Yes, You Can Run 14’s, But It’s Not Easy: This kit will allow your Jeep JK to run 2.0 x 14 travel Fox or King coilovers with 5 of up travel on 4.5 of lift and 3 bump stop spacers. This setup provides substantially more droop than lift kits and bolt on aftermarket parts can support. Recommended only for experts using aftermarket axles and custom suspension geometry. May require heavy exhaust and skid plate modifications. What’s Required: Longer brake lines suitable for your lift height & wheel travel Sway Bar links suitable for your lift height & wheel travel Wheels with 4 backspacing minimum Aftermarket driveshaft Lift kit components for desired lift height (control arms, steering, etc) Installation Notes: Requires cutting, grinding and welding.
FRONT INSTALL REAR INSTALL
- Product Brand: Fox
- Product Brand: King
- Product Shock Size: 2.0
- Product Shock Size: 2.5
- Front Air Bumps: Fox IFP Air Bump Stops | Fox 2.0 Universal Bump Stop | King 2.0 Air Bump Stops
- Product Finish: FOX Grey Cerakote
- Product Finish: Zinc Plated
Where We Shop
Recent Reviews
-
03+ 4Runner and 10+ FJ Cruiser Mid Travel Suspension Kit, Stage 4A - Fox
by Russ
-
Jeep Wrangler JL 3" Lift Kit, Stage 4 - Fox 2.0 IFP
by Daniel Sullivan
-
03+ 4Runner Mid Travel Suspension Kit, Stage 3A - Fox
by David Sousa
