AccuTune Off-Road Control Arms have been designed to work with standard or extended travel coilovers. Maximum shock extended length is 22.6”, measured from underneath the OEM frame mount to center of the lower shock mount. This includes any spacers. These Upper Control arms are not designed to be used with a Long Travel Kit, Drop Bracket Lift or spindle lift. Warranty void with aftermarket lower control arms. Many aftermarket lower control arms move the shock mount to wheel location, which results in increased droop and may exceed the travel limitations of the ball joint.
Tire & Wheel Fitment
Due to the variety of manufactures and options, we cannot guarantee every tire and wheel fitment. In general, tire sizes up to 285/70/17 have fit without the need of a cab mount chop. The bumper and other related parts may need to be trimmed for tire clearance. Wheel offset recommendations: 17x9 wheel, 4.5” backspacing.
AccuTune Offroad Quality
AccuTune Offroad strives to provide high quality products that look great and perform even better. These upper control arms for 05+ Tacomas are made from DOM tubing with high quality powder coat finish.
Sealed Heim Joints
These high quality, American made rod ends are sourced from FK Rod Ends. These joints will withstand extreme off-road use over long periods of time. To help avoid premature wear, we've included seals that help keep debris out. These seals will help the joint last for a long time without squeaking. Heim joints at the frame pivot provides firm steering both on and off-road for controlled performance.
Ball Joint with Billet Cap
A high quality all steel ball joint is used for simplicity and durability. These ball joints will hold up great under hard off-road use and have proven to withstand harsh muddy environments. Ball joints come greased ready to run out of the box. The aluminum ball joint cap is removable to access zerk fitting for greasing.