Ride Shocks, Tubular Upper Control Arm Kit, Urethane Bushing, Ball Joint, 2024+ Tacoma
The Ride Shocks Upper Control Arms for the 2024 Toyota Tacoma are engineered to eliminate the limitations of factory geometry when running larger tires and mid-travel suspension. Designed specifically for performance driven builds, these Tacoma upper control arms help maintain proper alignment while maximizing suspension capability on and off-road.
Constructed from high-strength tubular steel, Ride Shocks upper control arms feature a durable powder coat finish for long-term corrosion resistance and a clean, aggressive look. Unlike non-serviceable options, they’re equipped with low-friction urethane bushings for extended lifespan and consistent performance over time.
At the pivot point, a fully sealed, greasable all-metal ball joint keeps dirt and debris out while delivering smooth articulation and dependable strength in harsh conditions.
If you’re pushing your Tacoma beyond stock limits, these Ride Shocks Tacoma upper control arms are built to keep everything aligned, controlled, and ready for whatever terrain is ahead.
-1.50 x .120 wall DOM tubing
-Powder coat finish
-High quality urethane bushing
-Sealed high quality metal ball joint
-Aluminum ball joint cap is included
-Made in the USA
–3 Year/36k Mile Warranty
$899.95
-
- Features
- Reviews
Features
Fitment Notes
Ride Shocks Upper Control Arms have been designed to work with standard or extended travel coilovers. Maximum shock extended length is 25.34”, measured from underneath the OEM frame mount to center of the lower shock mount. This includes any spacers. These Upper Control arms are not designed to be used with a Long Travel Kit, Drop Bracket Lift or spindle lift. Warranty void with aftermarket lower control arms. Many aftermarket lower control arms move the shock mount to wheel location, which results in increased droop and may exceed the travel limitations of the ball joint.
Tire & Wheel Fitment
Due to the variety of manufactures and options, we cannot guarantee every tire and wheel fitment. In general, tire sizes up to 285/70/17 have fit without any additional modifications. Fitting 35" tire can easily be accomplished with the correct wheel backspacing and minor trimming. Wheel offset recommendations: 17x7.5 wheel with 25mm offset.
Ride Shocks Quality
Ride Shocks and AccuTune Offroad strive to provide high quality products that look great and perform even better. These upper control arms for 4th Gen Tacomas are made from 1.50" DOM tubing with high quality powder coat finish.
Urethane Bushings
These high quality, American made rod ends are sourced from FK Rod Ends. These joints will withstand extreme off-road use over long periods of time. To help avoid premature wear, we've included seals that help keep debris out. These seals will help the joint last for a long time without squeaking. Heim joints at the frame pivot provides firm steering both on and off-road for controlled performance.
Ball Joint with Billet Cap
A high quality all steel ball joint is used for simplicity and durability. These ball joints will hold up great under hard off-road use and have proven to withstand harsh muddy environments. Ball joints come greased ready to run out of the box. The aluminum ball joint cap is removable to access zerk fitting for greasing.
Reviews
Where We Shop
Recent Reviews
-
Jeep Wrangler JL 3" Lift Kit, Stage 4 - Fox 2.0 IFP
by Daniel Sullivan
-
Off Road Shock Tuning
by Tom More
-
Off Road Shock Tuning
by Mike Baker
Reviews
There are no reviews yet.