{"title":"Bronco Rear Control Arms and Track Bars","description":"\u003cp\u003eRear control arms and track bars keep the Bronco's rear axle centered and properly located once it's lifted, instead of pulling off to one side. Lifting a solid rear axle shifts both the axle's fore-aft position and its side-to-side centering under the chassis. This is also where brand research tends to concentrate: Dirt King and Total Chaos are the two names most associated with heavy-duty, desert-proven fabricated arms built for long-travel and serious off-road loads; Icon Vehicle Dynamics is a common search for owners comparing a more street-and-overland-focused control arm; and SPC is the name that comes up most for adjustable alignment-correction arms on a moderately lifted daily driver.\u003c\/p\u003e\u003cp\u003eAccuTune carries options across that full range, matched to your build rather than a one-arm-fits-all approach.\u003c\/p\u003e","products":[{"product_id":"camburg-2021-ford-bronco-rear-tubular-lower-control-arms","title":"Tubular Lower Control Arms, Rear","description":"\u003cp\u003eFord Bronco lower control arms are prone to damage as well as limiting wheel travel and articulation. Camburg tubular uniball series trailing arms take your rig to the next level. These control arms are tough, built with thick walled 4130 chromoly tubing for greater strength and impact resistance when hitting the trails.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFK 1\" uniball bearing pivots\u003c\/li\u003e\n  \u003cli\u003eThick-walled 4130 chromoly tubing\u003c\/li\u003e\n  \u003cli\u003eMaximum articulation \u0026amp; wheel travel\u003c\/li\u003e\n  \u003cli\u003eGrade 9 hardware\u003c\/li\u003e\n  \u003cli\u003eMade in the USA\u003c\/li\u003e\n  \u003cli\u003eDoes not fit the Bronco Raptor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Camburg Engineering","offers":[{"title":"Default Title","offer_id":67562876403757,"sku":"CAM-120031","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/7997\/7005\/files\/7wjo8has2e19lwsumlmgf3onnrpe.jpg?v=1790057766"},{"product_id":"icon-2021-ford-bronco-rear-billet-lower-control-arms","title":"Billet Lower Control Arms, Rear","description":"\u003cp\u003eICON’s billet aluminum rear lower link arms for the 2021-UP Ford Bronco are a significant upgrade over the Factory Series units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOn vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System\u003c\/li\u003e\n  \u003cli\u003eVehicle specific, high clearance design for reduced link contact with obstacles\u003c\/li\u003e\n  \u003cli\u003eReplaceable Nylon Rock Slider to protect the link from damage\u003c\/li\u003e\n  \u003cli\u003eCNC machined 6061 aluminum construction\u003c\/li\u003e\n  \u003cli\u003eLarge FK Bearing JMX16T PTFE-lined rod ends\u003c\/li\u003e\n  \u003cli\u003eMaintenance free, dual durometer bushings for maximum angularity and noise isolation\u003c\/li\u003e\n  \u003cli\u003eCovered by ICON’s Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":67562911334445,"sku":"ICON-44000","price":1761.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/7997\/7005\/files\/pykgm7176dmiekvk8czkh243haln.jpg?v=1790059127"},{"product_id":"icon-2021-ford-bronco-rear-tubular-lower-control-arms","title":"Tubular Lower Control Arms, Rear","description":"\u003cp\u003eThe ICON Tubular Rear Lower Link System helps free up rear axle movement on the 2021-UP Ford Bronco to allow for increased suspension travel and articulation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdjustable for various lift heights \u0026amp; driveline angles\u003c\/li\u003e\n  \u003cli\u003eImproves link angles to help free rear suspension bind\u003c\/li\u003e\n  \u003cli\u003eHigh clearance Lower Link design for reduced contact with obstacles\u003c\/li\u003e\n  \u003cli\u003eCNC machined \u0026amp; notched 1026 DOM steel construction with semi-gloss black powder coat finish\u003c\/li\u003e\n  \u003cli\u003eMulti durometer bushings for noise free operation and maximum angularity\u003c\/li\u003e\n  \u003cli\u003eNo grease required for life of bushings\u003c\/li\u003e\n  \u003cli\u003eQuality JM16T PTFE-lined FK Rod Ends\u003c\/li\u003e\n  \u003cli\u003eFabricated components covered under ICON's Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":67562911465517,"sku":"ICON-44000T","price":762.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/7997\/7005\/files\/fsu05mbcwlstawt1xucudm4j32ey.jpg?v=1790059129"},{"product_id":"icon-2021-ford-bronco-rear-billet-upper-control-arms","title":"Billet Upper Control Arms, Rear","description":"\u003cp\u003eICON’s billet aluminum rear upper link arms for the 2021-UP Ford Bronco are a significant upgrade over the Factory Series units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOn vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System\u003c\/li\u003e\n  \u003cli\u003eVehicle specific, high clearance design for reduced link contact with obstacles\u003c\/li\u003e\n  \u003cli\u003eReplaceable Nylon Rock Slider to protect the link from damage\u003c\/li\u003e\n  \u003cli\u003eCNC machined 6061 aluminum construction\u003c\/li\u003e\n  \u003cli\u003eLarge FK Bearing JMX16T PTFE-lined rod ends\u003c\/li\u003e\n  \u003cli\u003eMaintenance free, dual durometer bushings for maximum angularity and noise isolation\u003c\/li\u003e\n  \u003cli\u003eCovered by ICON’s Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":67562911563821,"sku":"ICON-44100","price":1089.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/7997\/7005\/files\/zatg2tl6fya53ttttzu5a38eocmc.jpg?v=1790059132"},{"product_id":"icon-2021-ford-bronco-rear-tubular-upper-adjustable-control-arms","title":"Tubular Upper Adjustable Control Arms, Rear","description":"\u003cp\u003eThe ICON Tubular Rear Upper Link System helps free up rear axle movement on the 2021-UP Ford Bronco to allow for increased suspension travel and articulation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdjustable for various lift heights \u0026amp; driveline angles\u003c\/li\u003e\n  \u003cli\u003eImproves link angles to help free rear suspension bind\u003c\/li\u003e\n  \u003cli\u003eHigh clearance Lower Link design for reduced contact with obstacles\u003c\/li\u003e\n  \u003cli\u003eCNC machined \u0026amp; notched 1026 DOM steel construction with semi-gloss black powder coat finish\u003c\/li\u003e\n  \u003cli\u003eMulti durometer bushings for noise free operation and maximum angularity\u003c\/li\u003e\n  \u003cli\u003eNo grease required for life of bushings\u003c\/li\u003e\n  \u003cli\u003eQuality JM16T PTFE-lined FK Rod Ends\u003c\/li\u003e\n  \u003cli\u003eFabricated components covered under ICON's Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":67562911662125,"sku":"ICON-44100T","price":653.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/7997\/7005\/files\/pdfxejdpr5pco4jd9sq2rqv5o4hr.jpg?v=1790059135"},{"product_id":"rockjock-4x4-2021-up-ford-bronco-rear-upper-control-arms","title":"Upper Control Arms, Rear","description":"\u003cp\u003eRockJock’s Johnny Joint Rear Upper Control Arm Set for all 2021-up Broncos provides you with extremely heavy duty, adjustable length control arms to replace your Factory Series control arms. Adjustable Control Arms are a must for aligning lifted vehicles to get your pinion angle specs. in check and our double adjustable design allows you to easily adjust the length of the arms without removing either end from the vehicle!\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eAdjustment Range: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClosed – 13.900 in.\u003c\/li\u003e\n  \u003cli\u003eExtended – 16.000 in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eNotes: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFactory Series hardware is retained to attach arms to the axle and the chassis.\u003c\/li\u003e\n  \u003cli\u003e1 5\/8 in. o.d. x.250 in. wall d.o.m. steel tubing.\u003c\/li\u003e\n  \u003cli\u003eAdjusters feature 1 1\/4 in.-12 RH\/LH threads.\u003c\/li\u003e\n  \u003cli\u003eJohnny Joints require non-synthetic, hi-moly lube grease such as our CE-9013G\u003c\/li\u003e\n  \u003cli\u003eApplicable Johnny Joint Tool for these Control Arms:  CE-9110T\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Jock 4x4","offers":[{"title":"Default Title","offer_id":67562952163373,"sku":"RJ-182500-101","price":515.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/7997\/7005\/files\/as940j8n2vwetntxvzgftoelssht.jpg?v=1790059964"},{"product_id":"rockjock-4x4-2021-up-ford-bronco-rear-lower-control-arms","title":"Lower Control Arms, Rear","description":"\u003cp\u003eRockJock’s Johnny Joint Rear Lower Control Arm Set for all 2021-up Broncos provides you with extremely heavy duty, adjustable length control arms to replace your Factory Series control arms. Adjustable Control Arms are a must for aligning lifted vehicles to get your pinion angle specs. in check and our double adjustable design allows you to easily adjust the length of the arms without removing either end from the vehicle!\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eAdjustment Range: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClosed – 25.100 in.\u003c\/li\u003e\n  \u003cli\u003eExtended – 27.000 in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eNotes: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFactory Series hardware is retained to attach arms to the axle and the chassis.\u003c\/li\u003e\n  \u003cli\u003e1 5\/8 in. o.d. x.250 in. wall d.o.m. steel tubing.\u003c\/li\u003e\n  \u003cli\u003eAdjusters feature 1 1\/4 in.-12 RH\/LH threads.\u003c\/li\u003e\n  \u003cli\u003eJohnny Joints require non-synthetic, hi-moly lube grease such as our CE-9013G\u003c\/li\u003e\n  \u003cli\u003eApplicable Johnny Joint Tool for these Control Arms:  CE-9110T\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Jock 4x4","offers":[{"title":"Default Title","offer_id":67562952327213,"sku":"RJ-182600-101","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/7997\/7005\/files\/yq9lr5cr9qnkiya6xxwp94euvosb.jpg?v=1790059966"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/7997\/7005\/collections\/ford-bronco-rear-control-arms-track-bars.jpg?v=1789930060","url":"https:\/\/accutuneoffroad.com\/collections\/bronco-rear-control-arms-and-track-bars.oembed","provider":"AccuTune Off-Road","version":"1.0","type":"link"}